Please check the time zone of your device. Some Android TV devices show the correct time but has a wrong timezone set. You can check this by opening the about area in my app. You can also change the timezone in "More settings" within the app if your TV does not offer this feature.

Unter Einstellungen - Weitere Einstellungen können Sie die Option "Anwendung automatisch starten" aktivieren um die Anwendung beim Start des Android TV / Fire TV Geräts automatisch zu starten.

Wichtig: Ab Android 10 hat Google diese Funktion leider deaktiviert. Mit dem folgenden Workaround können Sie das Feature weiterhin nutzen. Dieses erfordert allerdings ein paar Vorkenntnisse und wird nicht supported:

Installieren Sie ADB auf einem PC, aktivieren Sie den Entwicklermodus auf dem Gerät und führen Sie folgenden Befehl aus:

adb shell appops set de.cyberdream.iptv.tv.player SYSTEM_ALERT_WINDOW allow

Anschließend aktivieren Sie erneut die Option "Anwendung automatisch starten"

In settings - more settings you can enable the option "Autostart app" to start the app when

Important: Google disabled the feature to autostart apps with Android 10. It is still possible to use it with this unsupported workaround:

Install adb on your PC and enable debug mode on your Android TV device and execute this statement:

adb shell appops set de.cyberdream.iptv.tv.player SYSTEM_ALERT_WINDOW allow

Then enable the setting "Autostart app" in settings again

The app supports surround sound (AC3, DTS) via downmix and/or passthrough if the selected audio track supports AC3 or DTS and the device on which the app is running also supports this and has configured it correctly in the audio settings.

If the internal decoder VLC (see Playback Settings - Decoder) is used, the option Surround Passthrough must be activated under Audio Settings. If no 5.1 / 7.1 sound is heard, please set the Audio Device setting to Digital and activate the Prefer AC3 option. If there is no sound, it is due to an open problem of the VLC player that occurs on some devices (Sony Bravia and others). In this case, ExoPlayer should be used.

If the internal decoder ExoPlayer (see Playback Settings - Decoder) is used, the option Surround Passthrough must be activated under Audio Settings. If still no 5.1 / 7.1 sound is heard, please deactivate the FFMpeg setting and activate the Prefer to AC3 option.